Anzeige
Ergebnis 1 bis 7 von 7

Thema: Windows 8 64 Pro Bluescreen

  1. #1
    djducky
    bekommt Übersicht

    Windows 8 64 Pro Bluescreen

    Ihr Lieben,

    ich bin neu und habe gleich eine dringende Frage.

    Kann jemand damit was anfangen?
    Windows 8 64 Pro Bluescreen-screenshot6wnkay.jpg
    Rechts unten sieht man auch, dass nach dem reboot die Symbole für die Festplatten nicht mehr richtig sind, das erste Symbol z.B. müsste so aussehen:
    Windows 8 64 Pro Bluescreen-windows_8_drive_icon.jpg
    Danke erstmal.

    PS: Auf meiner Platte sind plötzlich ca. 6GB mehr belegt?

    Nach noch nem reboot sind die richtigen Symbole wieder da.

    Hier noch mehr Infos:
    Windows 8 64 Pro Bluescreen-screenshot7s7el2.jpg
    Das Ganze ist im idle passiert bzw. beim normalen Surfen.

    i5 3470
    Thermalright Macho
    Corsair Vengeance LP 1600
    HD 7870 PCS+
    ASRock Z77 Pro3
    Crucial M4 128GB
    Seagate Barracuda 2TB

    (Profil ist ausgefüllt)

    Braucht ihr evtl. mehr Infos?

    Ich nutze übrigens die Catalyst 12.10 (per "alten Treiber verwenden"), nachdem die 13.1 bei mir in Firefox Anzeigebugs hatte...
    Geändert von Ari45 (26.01.2013 um 05:57 Uhr) Grund: Bilder als Anhang eingefügt

  2.   Anzeige

     
  3. #2
    djducky
    bekommt Übersicht

    AW: Windows 8 64 Pro Bluescreen

    Hier mal das, was BluescreenView sagt:



    Und WindowsDebug:
    verborgener Text:
    Code:
    Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.
    
    
    Loading Dump File [C:\Windows\Minidump\012513-9250-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    
    Symbol search path is: *** Invalid ***
    ****************************************************************************
    * Symbol loading may be unreliable without a symbol search path.           *
    * Use .symfix to have the debugger choose a symbol path.                   *
    * After setting your symbol path, use .reload to refresh symbol locations. *
    ****************************************************************************
    Executable search path is: 
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    Machine Name:
    Kernel base = 0xfffff800`e1a09000 PsLoadedModuleList = 0xfffff800`e1cd3a80
    Debug session time: Fri Jan 25 22:37:34.621 2013 (UTC + 1:00)
    System Uptime: 2 days 1:32:13.263
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Loading Kernel Symbols
    ...............................................................
    ................................................................
    ....................................
    Loading User Symbols
    Loading unloaded module list
    ............................................
    *** WARNING: Unable to verify timestamp for watchdog.sys
    *** ERROR: Module load completed but symbols could not be loaded for watchdog.sys
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    Use !analyze -v to get detailed debugging information.
    
    BugCheck 119, {1, c223a7, c223a9, c223a6}
    
    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.
    
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that   ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that   ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!KPRCB                                      ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that   ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that   ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!KPRCB                                      ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that   ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that   ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that   ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that   ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    Probably caused by : watchdog.sys ( watchdog+255d )
    
    Followup: MachineOwner
    ---------
    Miniaturansichten angehängter Grafiken Miniaturansichten angehängter Grafiken Windows 8 64 Pro Bluescreen-screenshot9i2utu.jpg  
    Geändert von Ari45 (26.01.2013 um 06:00 Uhr) Grund: Bild als Anhang eingefügt

  4. #3
    djducky
    bekommt Übersicht

    AW: Windows 8 64 Pro Bluescreen

    Und das sagt die MEMORY.dmp:

    Hoffe es ist nicht der RAM.

    verborgener Text:
    Code:
    Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.
    
    
    Loading Dump File [C:\Users\Daniel\Desktop\MEMORY.DMP]
    Kernel Bitmap Dump File: Only kernel address space is available
    
    Symbol search path is: *** Invalid ***
    ****************************************************************************
    * Symbol loading may be unreliable without a symbol search path.           *
    * Use .symfix to have the debugger choose a symbol path.                   *
    * After setting your symbol path, use .reload to refresh symbol locations. *
    ****************************************************************************
    Executable search path is: 
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    *** ERROR: Symbol file could not be found.  Defaulted to export symbols for ntkrnlmp.exe - 
    Windows 8 Kernel Version 9200 MP (4 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
    Machine Name:
    Kernel base = 0xfffff800`e1a09000 PsLoadedModuleList = 0xfffff800`e1cd3a80
    Debug session time: Fri Jan 25 22:37:34.621 2013 (UTC + 1:00)
    System Uptime: 2 days 1:32:13.263
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    *** ERROR: Symbol file could not be found.  Defaulted to export symbols for ntkrnlmp.exe - 
    Loading Kernel Symbols
    ...............................................................
    ................................................................
    ....................................
    Loading User Symbols
    
    Loading unloaded module list
    ............................................
    *** ERROR: Symbol file could not be found.  Defaulted to export symbols for watchdog.sys - 
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    Use !analyze -v to get detailed debugging information.
    
    BugCheck 119, {1, c223a7, c223a9, c223a6}
    
    *** ERROR: Symbol file could not be found.  Defaulted to export symbols for dxgmms1.sys - 
    *** ERROR: Symbol file could not be found.  Defaulted to export symbols for dxgkrnl.sys - 
    *** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
    *** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.
    
    Page 2189bc not present in the dump file. Type ".hh dbgerr004" for details
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that   ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that   ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!KPRCB                                      ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that   ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that   ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!KPRCB                                      ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that   ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that   ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that   ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Either you specified an unqualified symbol, or your debugger   ***
    ***    doesn't have full symbol information.  Unqualified symbol      ***
    ***    resolution is turned off by default. Please either specify a   ***
    ***    fully qualified symbol module!symbolname, or enable resolution ***
    ***    of unqualified symbols by typing ".symopt- 100". Note that   ***
    ***    enabling unqualified symbol resolution with network symbol     ***
    ***    server shares in the symbol path may cause the debugger to     ***
    ***    appear to hang for long periods of time when an incorrect      ***
    ***    symbol name is typed or the network symbol server is down.     ***
    ***                                                                   ***
    ***    For some commands to work properly, your symbol path           ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    Probably caused by : dxgmms1.sys ( dxgmms1+70b2 )
    
    Followup: MachineOwner
    ---------

    Könnte es am VRam bzw. den Treibern liegen? Hatte ja mit catalyst folgendes Problem bei Firefox mit aktivierter hardwarebeschleunigung:
    Miniaturansichten angehängter Grafiken Miniaturansichten angehängter Grafiken Windows 8 64 Pro Bluescreen-screenshot12irjb.jpg  
    Geändert von Ari45 (26.01.2013 um 06:01 Uhr) Grund: Bild als Anhang eingefügt

  5. #4
    Ari45
    gehört zum Inventar Avatar von Ari45

    AW: Windows 8 64 Pro Bluescreen

    Guten Morgen @djducky!
    Willkommen im Forum!
    In deinem ersten Posting auf dem 2. Bild sieht man, dass du einen Vorabversion (CP oder RP) benutzt.
    Diese waren bist 15.01.2013 begrenzt und sollen ab 16.01.2013 0:00 Uhr nicht mehr (richtig) laufen.

  6. #5
    Multi_OS
    Fachinform. Sys-Integr. Avatar von Multi_OS

    AW: Windows 8 64 Pro Bluescreen

    Also ich sehe im zweiten Posting Ari45, das er die finale Version benutzt:
    Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.

    Hmm oda

  7. #6
    djducky
    bekommt Übersicht

    AW: Windows 8 64 Pro Bluescreen

    Danke für die nette Begrüßung,

    Das zweite Bild ist irgendeine chinesische Version und evtl. eine Vorabversion. Das habe ich kurz ausm netz gefischt wegen des HDD-Symbols. Meine Version ist natürlich eine finale.

    10 Stunden memtest86+ liefen jetzt ohne Probleme.


    Langsam haben ich und andere den GraKa-Treiber in verdacht. Evtl. ist der einfach noch nicht besonders gut.
    Geändert von djducky (26.01.2013 um 12:47 Uhr)

  8. #7
    djducky
    bekommt Übersicht

    AW: Windows 8 64 Pro Bluescreen

    Und hier das Ergebnis eines Deinstalls von catalyst und Neuinstall von 13.1:
    Windows 8 64 Pro Bluescreen-screenshot102eek6.jpg

    Hab jetzt erstmal 13.1 drauf gelassen, im FF HW-Acc deaktiviert, dafür testweise in Chrome aktiviert - Chrome macht keine Probleme, auch nicht bei Videos.

    Meine Vermutung an dieser Stelle ist: Die Hardwarebeschleunigung von FF ist im Zusammenspiel mit Win8 und den aktuellen catalyst-Versionen fehlerhaft.

    In Spielen (DIRT Showdown) äußert sich nichts, keine Fehler.


    PS: ich wollte das Bild anhängen, ist aber angeblich zu groß...
    Geändert von Ari45 (26.01.2013 um 16:40 Uhr) Grund: Bild als Anhang eingefügt

Ähnliche Themen

  1. [gelöst] Windows 8 Pro Upgrade: Muss Windows 7 dafür installiert sein?
    Von Freak-X im Forum Windows 8 und Windows RT
    Antworten: 1
    Letzter Beitrag: 24.10.2012, 10:50
  2. Windows Surface Windows RT/8 Pro und Office 2013
    Von Lugia1fuä im Forum Microsoft Office
    Antworten: 4
    Letzter Beitrag: 14.10.2012, 23:13
  3. Antworten: 0
    Letzter Beitrag: 16.08.2012, 11:19
  4. Antworten: 0
    Letzter Beitrag: 02.02.2012, 16:46
  5. System: [gelöst] HP6530b Windows 7 Pro 32Bit, nach SP1 Bluescreen
    Von FlausnOhnePaus im Forum Windows 7 allgemein
    Antworten: 19
    Letzter Beitrag: 31.10.2011, 09:28

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •